PINGEQUA
Flipper Zero用 2-in-1 RFモジュール – nRF24L01+ + CC1101 433 MHz
Flipper Zero用 2-in-1 RFモジュール – nRF24L01+ + CC1101 433 MHz
受取状況を読み込めませんでした
One module. Two radios. Zero workarounds.
A 2-in-1 nRF24L01+ + CC1101 GPIO board for Flipper Zero. Both chips share the SPI bus and are selected in software via dedicated CSN lines, with no jumpers, toggles, or manual switching. Ships with its own open-source toolkit.
- nRF24L01+ 2.4 GHz + CC1101 Sub-GHz
- Dedicated CSN per chip · firmware-controlled
-
Official open-source
.fap· zero manual setup - Verified on Official · Momentum · Unleashed · RogueMaster
Shared SPI · dedicated CSN per chip.
Use Momentum firmware, then configure GPIO pins:
START → PROTOCOLS → GPIO PINS
Set NRF24 SPI to Extra 7.
Some older third-party nRF24 apps hardcode legacy pin assignments, so partial incompatibility may remain outside the official PINGEQUA toolkit.
Three steps. Both radios live.
pingequa_rf_toolkit.fap and drag it into /ext/apps/GPIO/ via qFlipper.Apps → GPIO → PINGEQUA RF Lab on your Flipper.What ships to your door.
Flipper Zero host device is not included.
Technical specifications.
- 2.4 GHz Transceiver
- Nordic Semiconductor nRF24L01+
- Sub-GHz Transceiver
- Texas Instruments CC1101
- SPI Bus
- Shared (MOSI · MISO · SCK)
- nRF24 Chip Select
- Extra 7 (configurable)
- CC1101 Chip Select
- Pin 4
- Host Interface
- Flipper Zero left GPIO header, no soldering required
- Enclosure
- 3D-printed crystal-frost PLA, pre-installed
- Antennas
- 1× 2.4 GHz + 1× Sub-GHz, matched
- Companion FAP
-
pingequa_rf_toolkit.fap(open-source) - Repository
- github.com/pingequalab/rf-lab
- Documentation
- pingequa.com/pages/wiki
- Firmware
- Official · Momentum · Unleashed · RogueMaster
Questions, answered straight.
Q · 01Will my Flipper firmware work, and what if I don't want to use your toolkit?+
Verified on Official, Momentum, Unleashed, and RogueMaster. With pingequa_rf_toolkit.fap, no GPIO setup is required.
If you prefer your firmware's native menus, both paths are documented:
Q · 02Older reviews mention "module not found" errors. Is that still an issue?+
Yes, it was real, and we do not hide it. Our dedicated-CSN layout was not compatible with some older third-party apps that hardcoded the legacy single-CSN pin assignment.
We addressed it by writing our own toolkit that drives both chips natively. Anyone affected should download the latest .fap above and try again.
Q · 03Do I need to solder anything? Is the Flipper Zero included?+
No soldering. The board plugs onto the Flipper Zero left GPIO header. Power off, slot it in, then power on.
The Flipper Zero itself is not included and is sold separately by Flipper Devices.
Q · 04Shipping, returns, and warranty?+
Worldwide shipping, processed within 48 hours. Typical delivery: 7–15 business days.
14-day return policy on unused items. Limited warranty against manufacturing defects, excluding damage from improper flashing or overvoltage.
For educational and research use. Operate only on devices and frequencies you are authorized to use.
Shipping & Delivery
Shipping & Delivery
We ship globally. Orders are typically processed within 48 hours. Estimated delivery: 7-15 business days depending on your region.
Warranty & Returns
Warranty & Returns
14-day return policy for unused items. Our hardware is backed by a limited warranty against manufacturing defects. (Note: Damage from improper flashing or overvoltage is not covered).
