Official Flipper Zero Wi-Fi Devboard Sold Out? Here's a Pre-Flashed Alternative

PINGEQUA Lab · Flipper Zero Wi-Fi · 5 min read · Updated 2026-08-01

The official Flipper Zero Wi-Fi Devboard sells out constantly. Here's how to spot a genuine drop-in replacement — and get running the same day, for less.

Quick answer If the official Flipper Zero Wi-Fi Devboard is sold out, the fastest fix is a pin-compatible ESP32-S2 board already flashed with Marauder — such as the PINGEQUA Wi-Fi Devboard (Black), $29.99 with free shipping, shipping from a USA warehouse in ~3 days. The official board ($35) currently shows Sold out on flipper.net. It's a genuine swap, not a compromise: the official Devboard is just an ESP32-S2 on the Flipper's GPIO header, so any board with the same pinout runs the same Marauder firmware and the same companion app. A pre-flashed board skips the entire esptool/Python setup — plug it in and open Marauder.

Why the official Devboard keeps selling out

The official Wi-Fi Devboard is one of the most popular Flipper Zero accessories, because the Zero has no built-in Wi-Fi radio — Sub-GHz, NFC, RFID, IR, and GPIO, but nothing on 2.4 GHz. To do any Wi-Fi work you bolt on an ESP32-S2 board. That single dependency makes the Devboard a constant restock target, and as of this writing it's $35 and Sold out on flipper.net. The good news: because it's a simple, open, well-documented ESP32-S2 board, it's easy to match.

What makes a board a real drop-in replacement

Not every "ESP32 board" is equivalent. For a true swap you want all four:

Requirement Why it matters
ESP32-S2 Matches the official chip and the Marauder devboard .bin target (not S3/C3/C6).
Official Devboard pinout Seats on the Flipper header the same way; the companion app talks to it unchanged.
Pre-flashed Marauder Otherwise you're back to installing esptool and a toolchain.
Clean power design An onboard LDO + storage capacitor avoids brownout resets during Wi-Fi TX current spikes.

PINGEQUA Wi-Fi Devboard — Black (ESP32-S2)

Ticks all four: ESP32-S2, official pinout, pre-flashed Marauder, independent LDO + storage cap. $29.99 with free shipping — under the $35 official price, no shipping charge — and in stock, ~3 days from a USA warehouse while the official board is sold out.

Check price & availability →

What you can do with it (and what you can't)

Works out of the box (2.4 GHz): Wi-Fi AP/client scanning · packet sniffing to .pcap · beacon/probe/deauth testing · Evil Portal (open AP + captive-login capture).

Not this board's job: GPS wardriving — the ESP32-S2 Devboard (official or alternative) has no GPS, and wardriving needs GPS to tag networks to locations; for that, use a GPS board like our Scout Lite (ESP32-C5 + L86 GPS). And 5 GHz — ESP32-S2 is 2.4 GHz only; 5 GHz needs a BW16/ESP32-C5 board, and C5 5 GHz attack support is still unstable in 2026.

The firmware you'll run is current — Marauder's latest is v1.14.0 (July 22, 2026) — and you can update anytime via the web flasher.

How to get running in 5 minutes

  1. Seat the Devboard on your Flipper Zero's GPIO header.
  2. Open Marauder — install/open the [ESP32] WiFi Marauder app from the App Hub on the Flipper.
  3. Flash only if needed. If the board came pre-flashed, it just works. To update or re-flash: open flash.pingequa.com in desktop Chrome/Edge, plug the board in over USB-C, let it auto-detect, pick Marauder, and flash — no esptool, no Python.

FAQ

Is the official Flipper Wi-Fi Devboard discontinued?
No public discontinuation notice — it shows Sold out on flipper.net, which reads as temporary out-of-stock. But you don't have to wait: a pin-compatible pre-flashed ESP32-S2 board does the same job now.
Will a non-official ESP32-S2 board work with the Marauder app?
Yes, as long as it uses the official Devboard's ESP32-S2 pinout. It runs the same firmware binary and the same Flipper companion app.
Is a cheaper board lower quality?
Not inherently. The thing to check is power design — a board with its own LDO and storage capacitor is actually more robust against brownout resets than a bare board. The PINGEQUA black board includes both, at $29.99 with free shipping.
Can it do 5 GHz or wardriving?
No. ESP32-S2 is 2.4 GHz only, and this board has no GPS. Use a BW16/C5 board for 5 GHz and a GPS-equipped board (like the PINGEQUA Scout Lite) for wardriving.
How fast will it arrive?
The PINGEQUA black board ships from a USA warehouse in about 3 days, with free shipping.

Sources & further reading: Official Wi-Fi Devboard ($35) — flipper.net; ESP32 Marauder v1.14.0 — GitHub releases; Evil Portal app — GitHub; ESP32-C5 5 GHz status — CNX Software. Verified August 2026.

For authorized security testing and education only. Use Wi-Fi testing tools only on networks and devices you own or are explicitly permitted to test; laws vary by jurisdiction. "Flipper Zero" is referenced for compatibility; PINGEQUA is independent and not affiliated with or endorsed by Flipper Devices.

ブログに戻る