Guides & Tutorials

Can a Flipper Zero Do 5 GHz Wi-Fi? 5Ghost vs th...

LiuColin

The ESP32 Marauder is 2.4 GHz only — the ESP32 has no 5 GHz radio. See how the dual-band RTL8720DN 5Ghost compares, and when each Flipper Zero Wi-Fi tool makes...

Can a Flipper Zero Do 5 GHz Wi-Fi? 5Ghost vs th...

LiuColin

The ESP32 Marauder is 2.4 GHz only — the ESP32 has no 5 GHz radio. See how the dual-band RTL8720DN 5Ghost compares, and when each Flipper Zero Wi-Fi tool makes...

Why nRF24 Scanner Apps Black-Screen on Dual-Chip PINGEQUA 2-in-1 Flipper Boards — and How We Fixed It

Why nRF24 Scanner Apps Black-Screen on Dual-Chi...

LiuColin

If you've run a generic nRF24 channel scanner on a 2-in-1 (nRF24 + CC1101) Flipper Zero board, you may have watched the screen go black in the middle of a...

Why nRF24 Scanner Apps Black-Screen on Dual-Chi...

LiuColin

If you've run a generic nRF24 channel scanner on a 2-in-1 (nRF24 + CC1101) Flipper Zero board, you may have watched the screen go black in the middle of a...

PINGEQUA 2-in-1 RF Devboard + RF Lab: The Fix We Built Ourselves

PINGEQUA 2-in-1 RF Devboard + RF Lab: The Fix W...

LiuColin

Plugged in a PINGEQUA NRF24+CC1101 2-in-1 board and your nrf24 channel scanner shows Black? That's not a hardware fault. We rebuilt the software from scratch to fix the SPI bus...

PINGEQUA 2-in-1 RF Devboard + RF Lab: The Fix W...

LiuColin

Plugged in a PINGEQUA NRF24+CC1101 2-in-1 board and your nrf24 channel scanner shows Black? That's not a hardware fault. We rebuilt the software from scratch to fix the SPI bus...

How to Install Marauder Firmware on Flipper Zer...

LiuColin

Flash Marauder onto your Flipper Zero Wi-Fi Devboard (ESP32-S2) in minutes — straight from your browser at flash.pingequa.com, no esptool or drivers. Plus an on-device method and a full troubleshooting...

How to Install Marauder Firmware on Flipper Zer...

LiuColin

Flash Marauder onto your Flipper Zero Wi-Fi Devboard (ESP32-S2) in minutes — straight from your browser at flash.pingequa.com, no esptool or drivers. Plus an on-device method and a full troubleshooting...