Flipper Zero Wi-Fi Board Quick Guide
1) Install & Use (30s)
Install & Use Demonstration
Step 1: Power OFF Flipper Zero
Make sure your Flipper Zero is completely powered off.Step 2: Insert the board
Insert the Wi-Fi board into the GPIO in the correct orientation. Do not force or tilt.
Step 3: Power ON & Open App
Turn on Flipper Zero and open the Wi-Fi Marauder app.2) Firmware Flash / Update (Web Flasher)
Firmware Flash Demonstration
Step 1: Press and Hold BOOT
Press and hold the BOOT button on the board.Step 2: Connect to PC/Mac
While holding BOOT, connect the board via USB.Step 3: Open Web Flasher
Open the web flasher → Connect → select firmware → Program.Step 4: Reset
After flashing, press the RESET button on the board.Recommended PC Web Flasher: https://fzeeflasher.com
Alternative (Flipper App: ESP Flasher): Copy flash files to microSD as instructed → run Flipper flasher tool → select files → flash.
Alternative (Flipper App: ESP Flasher): Copy flash files to microSD as instructed → run Flipper flasher tool → select files → flash.
